Land Rover Discovery 2 – 4 inch rear shock relocation kit dropper

Description

For discovery 2 all models. NO DRILLING REQUIRED!

Rear shock relocation kit for vehicles with upto 4 inch lift

YES 4 INCH RELOCATION kits for rear shockers

Evens out the extension / compression ratio of the rear shocks

When using lift blocks or extended springs, the rear shocks lose extension and gain 2 inches of unusable compression which makes the car drive like a pig. Often sounding like the world is going to end when going over a pothole in the road as the shocker reaches full extension or feeling unsafe when making corrections in steering causing sway

These relocation kits are designed to correct these problems.

ALL FIXINGS INCLUDED

How to fit, remove bolt from lower rear shock eye bush, thoroughly clean the axle area where the bracket fits. They are a snug fit so must be free from crud and rust. We spray a little white grease on the area first to make them slide on easily.

Slide in the bracket, note the are handed left and right

Drop the m10x30 bolt through the slot in the botton to the hole in the axle bracket. This hole may need clearing out first from road debris and flaking paint etc

Refit original shock absorber bolt loosely through the middle holes with steel tube

Mount shock eye bush bolt (included) though new mounting holes higher up

Tighten all bolts working from bottom up.

IMPORTANT.. all bolts must be loosely assembled before tightening any.

Job done drink beer!

We aim for next day delivery using dhl overnight.